Skip to main content

澳洲5注册

LEARN PCB
PCB Manufacturing
PCB Assembly
PCB Design and Layout
PCB Basics
Vias, Drilling & Throughplating
Mechanics
Surface
SMD
Quality
SPECIFICATIONS
PCB Fabrication
STANDARDS & POLICY
PCB Ordering
Policy

Kitting in PCB assembly is driven by growing customization and usage of component variants essential for assembly. Following specific kitting guidelines is crucial to obtain high-quality products at competitive pricing.

澳洲5开奖结果查询

Kitting is the process of putting together a set of components as a kit required to assemble circuit boards. Here the customer provides all the components that go on the board. Kitting brings all the materials/parts into one single package. It is extremely beneficial for the commencement of assembly since all the required components are available, verified, and placed in appropriate packaging.

Every board design and quantity requirements vary according to the customer. Hence, the kit criteria for each assembly project are different. In spite of these, there are particular rules to consider and standards to follow. The analogy could be that of cooking a recipe when all the ingredients are collected either from the market or from the kitchen and pantry. All these ingredients are brought together on the kitchen table and then cooked.

澳洲5官方网站

Below is the list of approximated kit guidelines for each component.

澳洲5开奖结果直播

packaging-of-smds-on-reels.jpg
Packaging of SMDs on reels

Leaded components or ICs

  • These parts should be sent in properly packaged containers (tubes, trays, or taps). Parts should be loaded in such a way that Pin1 should remain consistently in the same direction. Otherwise, it will cause directional placement issues resulting in compromised quality.
  • If the parts are handled manually, it can lead to coplanarity problems.

Digital signal processing chips (DSPs) and other ICs

  • Usually, these components require special handling. For example, moisture-sensitive components need baking. These should be sealed. If opened, they must be resealed according to specific techniques. In most cases, waffle trays are used for handling such parts.

Passive parts

  • Passive components like capacitors and resistors should be in proper pick and place format.
  • Include a few parts for attrition.

Connectors

  • For these parts, the original waffle packaging should be utilized to prevent damage to the leads.

Stencils

  • Engineers at Sierra Circuits will review the stencil supplied by the customer to ensure production and machine compatibility.

澳洲5几点开始

Sockets

  • These sockets should be delivered in their original packaging to avoid damaged or bent leads. These parts will create several manufacturing and quality flaws if sent otherwise.

DIP packages

  • These components can be supplied in tubes or in loose form.

Leaded parts

  • Typically, these components should be packed on reels to maintain their quality. Loose parts are also acceptable if they are properly packed and not oxidized in any way.

澳洲5基本走势图

If you are asking for consigned assembly (partial turnkey) quote, make sure to send all the required components for assembly while placing an order. Here are some critical kitting guidelines:

1. Each SMD line item should be on a single continuous tape (a minimum of 12″ long cut tape/reel/mini-reel). If not placed on a tape or reel, they must be on trays or tubes.

smds-packaged-in-tape-for-assembly.jpg

2. When shipping multiple work orders in one box, each work order must be individually packaged with its own set of components.

3. Each item should have an additional quantity of components for attrition during assembly. Refer to the following specifications:

澳洲5平台注册

  • 01005 size: Additional 50% attrition required with a minimum quantity of 150 pieces in a tape/reel/ mini-reel
    • Extra components should be greater than 150 pcs or 50% of the required quantity.
    • E.g., For 01005 size components, if required Qty = 70, 50% extra = 35, min Qty = 150. Total quantity required = 70 + max (35,150) = 70 + 150 = 220.
  • 0201 size: Additional 50% attrition required with a minimum quantity of 150 pieces in a tape/reel/mini-reel.
  • 0402 size:Additional 25% attrition required with a minimum qty of 150 pieces in a tape/reel/mini-reel.
  • 0603 size: Additional 15% attrition required with a minimum qty of 75 pieces in a tape/reel/mini-reel.
  • 0805 size: Additional 10% attrition required with a minimum of 75 pieces in a tape/reel/mini-reel.
  • 1206 size or larger: Additional 10% attrition required with a minimum of 75 pieces in a tape/reel/mini-reel.

澳洲5走势软件

  • Component width of 0.6 mm or smaller: 20% extra subject to a minimum of 20 pcs
    • Extra components should be greater than 20 pcs or 20% of the required quantity.
  • Component width of 0.6-1 mm: 10% extra subject to a minimum of 10 pcs
    • Extra components should be greater than 10 pcs or 10% of the required quantity.
  • Component width of 1-1.6 mm: 10% extra subject to a minimum of 5 pcs
    • Extra components should be greater than 5 pcs or 10% of the required quantity.
  • Component width of 1.6- 2 mm: 5% extra subject to a minimum of 5 pcs
    • Extra components should be greater than 5 pcs or 5% of the required quantity.
  • Component width larger than 2 mm: 5% extra subject to a minimum of 2 pcs
    • Extra components should be greater than 2 pcs or 5% of the required quantity.

3. Through-hole (DIP) ICs should be supplied in trays, tubes, or continuous tapes.

澳洲5几点开始

  • Small devices: 5% extra subject to a minimum of 2 pcs
    • Extra components should be greater than 2 pcs or 5% of the required quantity.
  • Other devices: 2% extra subject to a minimum of 1 piece
    • Extra components should be greater than 1 piece or 2% of the required quantity.

澳洲5数据

  • Hardware costing less than $.50: 10% extra subject to a minimum of 5 pcs
  • Hardware costing $.50-$2.00: 5% additional subject to a minimum of 2 pcs
  • Hardware costing more than $2.00: 2% extra subject to a minimum of 1 piece

4. Lack of attrition will be interpreted as parts shortage.

5. Make sure to ship all consigned parts in a properly kitted form (each line item of BOM in a separate bag, correctly marked for identifying the component unambiguously).

6. Kits for multiple jobs must be in separate bags recognized by the appropriate assembly order number.

7. All shipments must include the order number or quote number. Check FAQs for kitting.

Maintain a balance between material planning and handling to manage kit components effectively. This will help to overcome many challenges associated with handling, shipping constraints, and document control. If you are raising a quote for full turnkey assembly, we will take care of kitting requirements so you don’t have to.

 

Ship any consigned materials to:

1980 Lundy Avenue
San Jose, CA 95131

Mention your quote no., order no., or inventory no. 

澳洲5开奖结果时间

Sierra Circuits is
headquartered in Silicon Valley.
We welcome visitors at
our 70,000 sqft facility,
located at 1108 West Evelyn Avenue
in Sunnyvale, California.
Book a tour with an account manager today!
Let us introduce you to one of the most innovative communities of engineers and designers in the world.
We can help you plan your project from design to assembled board.

澳洲5平台

Our 70,000 sqft state-of-the-art campus in the heart of Silicon Valley contains the most advanced equipment required for the manufacture and assembly of your PCBs. Whether you’re looking for standard quick turn PCBs or boards with the tightest tolerances, made from exotic metals, there’s a reason Sierra Circuits leads the industry in quality and performance.

PCBs manufactured and assembled in the United States

澳洲5历史记录

Sierra Circuits can manufacture your PCB and have it expedited to you within 24 hours.

Full turnkey boards, with assembly and components in as fast as 5 days.


Get an Instant, Itemized Quote

澳洲5龙虎开奖结果

24 hours a day, 7 days a week.

Call us: +1 (800) 763-7503
Email us: through our Customer Care form

秒速赛车两期计划 极速飞艇官方网址 秒速赛车两期精准计划 澳洲幸运5分析软件